8 Steps To Become The ‘Jack’ Of All Trades
When you want to perform mechanical operations on your vehicle, jack stands are responsible for withstanding the weight of the car after you use a floor jack to prop them up. Buy a jack stand or related accessories from The Floor Jack Place that offer you plenty of choices. However, if you have less time at hand and there is an important errand to attend to, call certified technicians from www.yourmechanic.com who will be glad to repair your car.
How To Use Jack Stands
Step 1: To get started, you require 4 chocks, a floor jack, and a jack stand. Ensure that your car is parked on a solid surface that is devoid of any debris materials. This is to enable the jack stands to stay firm and support the vehicle without losing balance.
Step 2: Once your car is parked on an even surface, use the handbrake or the emergency brake that prevents the vehicle from moving.
Step 3: In addition to applying hand brakes, use wheel chocks for safety and prevent accidental movement of the car. When you are working at the rear end of the car, apply the chocks to the wheels, so there are no casualties involved.
Step 4: Before you work on the vehicle, look for any defects in the floor jack. It is best if you use a hydraulic jack to lift the heavy load off the ground. The device should raise and hold the vehicle in place.
Step 5: Go through the owner’s manual that accompanies every floor jack and read all about the approved jack points. These are the areas below the vehicle that can hold the weight of the car when it is lifted. For example, it can be an area under the frame rail or beneath the rear differential in Hummer.
Step 6: Whether you are using a Bottle Floor Jack or a Hydraulic Jack, position them below the recommended jack points as stated in the user’s manual. Using the force, lift the vehicle to a suitable height so you can carry out your maintenance job.
Step 7: Using jack stands to adjust them to the required height, so it provides support to the elevated vehicle. Fit them below the jack points as stated in the manual. Before you commence any repair work, cross check to ascertain that the jack stands are indeed placed on the safe points beneath the car.
Your car must be placed on an even surface to avoid the risk of a fatal accident. The jack stands must be secure and should not appear wobbly.
Step 8: It is now the turn of jack stands to support the car. Let go of the floor jack and keep them aside, while your vehicle balances itself on the jack stand. Give the car a gentle nudge to make sure it is held in place.
Before you position yourself beneath the car, you can place wooden blocks beneath the jack points. This takes care of the jack stand in the eventuality of a fall. Do not attempt to place delicate objects like bricks that can easily get crushed by the weight of the car.
These general safety tips must be implemented at all times.
· Never attempt to jack up the vehicle without placing chocks near the wheels. In case you are dealing with a flat tire, and you do not have any chocks at hand, park near the curb with the wheels positioned inwards.
· Never attempt to change a tire on a freeway. Keep the phone number of the nearest car service station so you can call them when the need arises.
· Exercise caution so there is no potential risk to passersby or your own life.